A member of the Robe iSeries, this IP65 rated luminaire gives you those compact WashBeam loved attributes of speed, colour and zoom range while capable of handling all the challenges of being outdoors.

Ideally suited for festivals, concerts, theatre, and outdoor events, or indeed any scenario dealing with inclement or unpredictable weather, the iBeam 250™ retains all the favourite features of its indoor relative, the LEDBeam 150™.

The ingenious ingress protection has been specifically designed and developed to ensure the fixture is completely sealed, to fully comply with IP65 protection standards.

Their aluminium housing gives a dust-free environment for the optics, eliminating the need for frequent cleaning, routine maintenance, and UV damage to plastic parts.

By including NFC (Near-Field Communication) technology, you can access setup, diagnostic and performance features, even when the fixture is not powered, directly from your mobile device using the Robe Com app.

iBeam 250™ uses the same 7 x 40-Watt RGBW multichip LED source as the original, producing an increased output of 4.400 lumens. With the identical 15.5:1 zoom optical system, giving the same, tight 3.8° Beam to wide 60° Wash, you have all the flexibility you require.

Keeping up with technological advances, we have incorporated Epass™ for maintaining network connectivity. For television users, Cpulse™ is included for flicker-free management of HD and UHD camera systems.

Designed to be used indoors or out, we make fixture swap with the original LEDBeam 150™ easy, as the DMX control channels, operating speeds, and feature set of both luminaires are identical.

iBeam 250™ - Robe reliability in all weathers!

Light source

7x 40W RGBW multichips

Light output

4.400 lm, 15.000 lx @ 5 m, Cpulse™ special flicker free management for HD and UHD cameras, ready for 8K and 16K

Zoom range

3,8° – 60°

Innovations

DataSwatch™ – inbuilt virtual colour library

The DataSwatch™ inbuilt virtual colour library for Robe LED fixtures provides consistent colour rendering with commonly matched filter ranges, allowing for rapid and accurate programming.

RLCT™ – Robe lens coating technology

Just like with spectacles, our lens coating technology protects soft plastic lenses against surface scratches, that can even occur during cleaning when scrubbed repeatedly. Anti-static properties prevent dust build-up on the lenses, thus extending the period between maintenance cleaning.

L3™ – Low Light Linearity System

The L3™ Low Light Linearity System produces imperceptible, ultra-smooth fades to black.

GDTF – General Device Type Format

The General Device Type Format creates a unified definition for exchange of data for the operation of intelligent luminaries, such as moving lights. The file format is human readable and developed using open source formats.

Tungsten Emulation

When selected, the luminaire will mimic the colour temperature of a tungsten lamp as you lower the output to produce that classic warm glow.

FW diffusers for pixelated washers

Robe fixtures homogenise beams really well but, for the ultimate smoothness, most of our pixelated LED wash lights can easily be fitted with a Fresnel Wash (FW) diffusion filter in-between the LED array and the lenses. They can also be ordered pre-installed if desired, as FW versions.

REAP™ – Robe Ethernet Access Portal

The Robe Ethernet Access Portal allows to access internal data from a networked fixture, viewed as a web page, addressable via the fixtures network IP.

Epass™

Robe lighting’s Epass™ provides Ethernet in/out connections with a pass-through switch that sustains Ethernet integrity when the fixture has no power to automatically maintain network connectivity.

Cpulse™ – Pulse Width Modulation Control

Cpulse™ is a PWM (Pulse Width Modulation) control system for luminaires that allows you to select and fine-tune the LED driving frequency, from either the fixture's onboard display or remotely via DMX. By frequency manipulation in a range from 800 Hz to 25 kH, you ensure no flicker will be visible on any camera system including the latest HD & UHD models, ready for 8K and 16K. This means our fixtures can be used with all the latest cameras types for TV, video and film applications.

Technical Specification

Expand AllDownload PDFCollapse All

Source

Light source type: 7 x 40W RGBW multichips

LED life expectancy: min. 50.000 hours

Typical lumen maintenance: L70/B50 @ 50.000 hours

Optical system

Dynamic Effects and Features

Colour mixing mode RGBW or CMY

White light: Variable CCT 2.700K - 8.000K

DataSwatch™ filters: pre-programmed 66 colours and tones including most used whites 2.700K, 3.200K, 4.200K, 5.600K and 8.000K

Tungsten lamp effect: 750W, 1.000W, 1.200W, 2.000W, 2.500W lamp emulation for whites from 2.700K to 4.200K (red shift and thermal delay)

Motorized zoom

Pre-programmed random strobe & pulse effects

High resolution electronic dimming: 0 - 100%

L3™ - (Low Light Linearity) Imperceptible 18 bit dimming for ultra smooth fade to black

Cpulse™ special flicker-free management for HD and UHD cameras, ready for 8K and 16K

Control and programming

Setting & Addressing: two-row LCD display & 4 control buttons, stand-alone operation with 3 editable programs (each up to 40 steps)

Protocols: USITT DMX-512, RDM

Wireless CRMX™ technology from Lumen Radio: on request

Epass™: Ethernet pass through switch which sustains Ethernet integrity, when the fixture has no power, to automatically maintain network connectivity - on request

DMX Protocol modes: 2

Control channels: 22, 16

Pan/Tilt resolution: 8 or 16 bit

RGBW / CMY: 8 or 16 bit

Zoom: 8 or 16 bit

Dimmer: 8 or 16 bit (internal 18 bit)

Movement

Thermal specification

Electrical specification and connections

Approvals

Mechanical specification

Rigging

Included items

Optional accessories

Diffusion filter: 2° FW 10980423

Safety wire 36 kg: 99011963

Mains Cable powerCON TRUE1 In/open ended, 2m EU, outdoor: 13052276

Mains Cable powerCON TRUE1 In/open ended, 2m US, outdoor: 13052277

Daisy Chain powerCON TRUE1 In/Out, EU, 0,75m, Outdoor: 13052278

Daisy Chain powerCON TRUE1 In/Out, US, 0,75m, Outdoor: 13052279

Daisy Chain powerCON TRUE1 In/Out, EU, 2m, Outdoor: 13052280

Daisy Chain powerCON TRUE1 In/Out, US, 2m, Outdoor: 13052281

Single Top Loader Case: 10120285

Quad Top Loader Case: 10120286

Quad Top Loader Case TALL: 10120302

Foam Shell: 20020443

Legal

Related News

2.12.2022

Robe Rocks LDI 2022 with “All Environments” live show and Innovative New Technologies

Robe lighting embraced the 2022 LDI expo in Las Vegas with a fantastic booth design, an invigorating live show, and a jaw-dropping line up of new and innovative products that stunned-and-amazed those in attendance.

11.11.2022

Robe at LDI 2022

Robe is delighted to be back at LDI 2022 in Las Vegas, action-packed with a range of exciting new products and innovative lighting technologies on Booth 1943 that will stun and amaze visitors!

9.9.2022

Robe Celebrates Award-Winning PLASA 2022 & presents “All Environments” Show

Robe celebrated two PLASA Innovation Awards, stunned audiences with its eye-catching “All Environments” live performance show - the only one at the 2022 PLASA expo; launched its new iFORTE® high powered IP rated LED moving light in style; introduced its brand new TX1 PosiProfile which was presented live for the first time; showcased several other inventive and cool iSeries products; … AND enjoyed the buzz and vitality of a production industry that’s back to full speed.